Skip to main content

How To Get Water Spots Off Glass Shower Doors

By May 29, 2023June 20th, 2023Home maintenance
Water stains on glass shower doors.

Owning a home requires a lot of maintenance and upkeep. There are a plethora of areas in the home that need constant cleaning and checking. One of those areas is the bathroom. With so much happening in the bathroom, you will find yourself spending a lot of your daily minutes cleaning the various parts of your bathroom. For example, if you have glass shower doors, you will need to clean them after every shower. Neglecting to clean the shower doors after every shower allows soap scum to build up on the doors. This will leave water spots that are tough to remove. Curious about how to get water spots off glass shower doors? Utilize a variety of products such as vinegar, baking soda paste, or even lemon juice.

Let’s take a look below at some other products that might help with this chore.

What Causes The Water Spots On The Doors?

Water spots that show up on your shower glass doors are a result of hard water and soap scum. What is soap scum? It is a combination of soap, shampoo, and body oils. Additionally, the water in your plumbing has calcium and magnesium and when they are mixed with the fatty acids in soap it will leave a crusty film. As far as hard water is concerned, there are mineral deposits in your water. One of those minerals is limescale. Limescale creates stains on the glass shower doors. Consider getting a water softener system to help keep your glass shower doors clean.

Use a variety of solutions to scrub away water spots on glass shower doors.

How Do I Remove The Spots?

Believe it or not, there are a variety of products that can assist you with removing the hard water stains off your shower glass doors. Let’s take a look below at what those cleaning products are to help remove water stains from glass doors.

  • White vinegar – Simply apply the distilled white vinegar to a sponge and sponge the vinegar onto the glass doors. Apply the vinegar a few times every 5 minutes. Then allow it to dry. If the soap scum isn’t too thick the vinegar will flake off with the soap scum. Scrub and rinse and repeat as needed.
  • Baking soda paste – Mix 1/2 cup of baking soda with water to create a paste. Apply the paste onto the glass doors with a soft cloth. Spray vinegar onto the paste to create a reaction. Let the paste sit for 20 minutes. Then wipe down the glass doors to see if it worked. Keep in mind that if you have a travertine or stone shower you should not use vinegar.
  • Lemon juice – Mix a cup of distilled water with three lemons. Use a spray bottle and spray the solution onto the shower doors and let it sit for 5 minutes. Take a microfiber cloth and dry the glass.
  • Borax – Just like with baking soda, you can add water to borax and create a paste. Then, use a damp sponge and rub the borax paste onto the glass doors. Lastly, rinse the paste off with distilled water. Borax can be found in the laundry section of any local grocery store.
  • Magic eraser – Use a magic eraser on the glass doors immediately after the shower. The excess water and warm air from the shower steam will interact with the magic eraser and help remove the soap scum and dirt. Then take a soft cloth and wipe down the doors.
  • Liquid dish soap and vinegar – Consider making a mixture of 1/2 cup vinegar and 1/2 cup dishwashing soap. Spray the glass with this and use a sponge to wipe down the glass doors.

Other Recommended Maintenance

Now that you know how to remove water spots from your glass shower doors, you can look at a few other areas of maintenance.

One of those is if you find a water stain on the ceiling. It is important to find out what is causing it. It could be coming from a leak on the roof, or from a second-floor radiator or air handler to name a few. Finding out the cause is important so you can take care of it before it worsens.

Next, another area that you will want to clean at the same time as you work to remove the water spots is the track that holds the shower doors. Also, in some homes, the shower glass doors are connected by a track that goes all around the glass. You will want to scrub and rinse any mold, mildew, or grime from the tracks.

Lastly, if you have a well and notice brown water flowing out of your faucets and shower something is wrong. Also, it could be your water softener, pipes, or too much iron in the water. Call a professional to inspect your well and test your well water.

Use a squeegee to prevent the water from drying on the glass doors.

When Do I Call A Professional?

The moment that you realize that you cannot get the water spots off the glass shower doors is a great time to reach out to a professional. Call on your local water softener expert to get some recommended solutions to this issue so it will be easier to clean the glass shower doors.

Additionally, they will be able to come and test your water and recommend a water softener system for your home to prevent hard water stains. Consequently, you can reach out to your local home inspection team to have your plumbing inspected during a full home inspection. Also, they can recommend a reputable local contractor to assist.

Conclusion

Having glass shower doors in your shower is an exciting upgrade for many homeowners. However, the upkeep and maintenance of the shower doors could become problematic. In most cases, hard water is flowing through your plumbing and when the shower water spots dry, they leave a film on the glass. Call on your local home inspection team to get a full inspection of your well water. Reach out to  All Coast Home Inspections for a well water inspection in Houston, TX.

Leave a Reply